SHARC Saw Parts for Amada Band Saws HFA400S HFA400CNC
SHARC Components to Fit Amada® 400 S/CNC Model Bandsaws using a 1.500" Blade
Part # NC400SA
complete set of 4 guides.

Moveable guides are shipped with pins installed and set to proper height.
Proudly Made
In the U.S.A.
SHARC: # NC400SABU
two complete back up sets as shown.
These assemblies are a direct replacement for the expensive and brittle factory assembly. They will fit into the existing guide holder and will last longer with less trouble than the O.E.M. units.
Back to SHARC Guides for Amada Saws Main Page
Installation is quicker and easier than with the factory units.
Once installed, the guide will float and then follow the blade.
The polyurethane strip at the top of the guide aids in vibration control.
Guides shown below installed into customer's existing guide holder.
All Blade Guides
Part # A-CCK001
Chip Conveyor kit as shown. Shaft A, bushings, chain with master link, stainless steel bolt, seal and spring pins.
Shaft A 1280685b
Chain RS40SL - 42 Link
Flanged Bushing MB1620-24FDU
Bushing MB1625
Seal SCB-16
Bolt M8 X 50 304SUS
Spring Pin 6 X 28
Chip Conveyor Kit # A-CCK001 Replaces these O.E.M Part #'s.
Description Part / Drawing #
Kit # CCK001 Fits All HFA500S & CNC Machines.
SHARC Part # CCK001
Guide Kit # NC500SA Replaces these O.E.M. Part #'s
1) 1233185a or 10559328
2) 1233186c or 10559327
Home
Fresh
Catches
Online
Catalog
Service
Remanufacturing
Information
Company
Place Your Order Now at 440-377-5657
Place Your Order Now at 440-377-5657
Fits all Older HFA500S & HFA500CNC saws utilizing the 10375302 / 1233920B Bearing Collar. Three Roller Assemblies per machine.
Replaces Part Numbers: Bearing Collar: 10375302 / 1233920B,
Ball Bearing: 10375307 / NAG4901UU, Seal: 10375308 / DS15223,
Snap Ring: 44611107 / RTW-24, Bearing Cap: 10375305 / 1233923B
Bearing Shaft: 10375303 / 1233921C, Screw: 10376215 / M6 X 16
Guide Roller for Older HFA400S & HFA400CNC
SHARC # A-400S-1233920
one Guide Roller Assembly as shown.
Comparison to OEM
SHARC's Replacement Roller Assembly, like all our products, has been field tested and approved. All critical dimensions are equal to those of the expensive factory unit.
Rebuild Kit for A-1233920
SHARC # A-1233920-RK
This is the complete rebuild kit for SHARC's guide roller assembly for Older HFA400S / HFA400CNC. This kit represents a savings of over 92% compared to the OEM rebuild.
Need Assistance? Call us at 440-377-5657
SHARC Part # NC400SABU
Large Anti-Vibration Roller for All HFA400S & HFA400CNC
SHARC # A-400S-1233927
Guide Roller Assembly as shown.
Replaces Part Numbers:1233927, 1301 or 10560128, BR-37 or 10348108, AE0838EO or 52314015 & P-9 or 1056007
SHARC's Replacement Roller Assembly, like all our products, has been field tested and approved. All critical dimensions are equal to those of the expensive factory unit.
What you get, Part Number A-400S-1233927
The SHARC Difference
Having been in the field rebuilding these units myself, I remember the frustrations of having no way to drive out the outer bearing race after failure. So you get SHARC's "in the field" trick from the start. A through hole in line with the outer race equipped with a set screw to keep out the dirt. Remove the screw and drive out the bearing.
SHARC # A-400S-1233927
Precision Machined and Hard Chrome Plated
Back to SHARC Guides for Amada Saws Main Page
Back to SHARC Guides for Amada Saws Main Page
Rebuild Kit for A-400S-1233927
SHARC # A-400S-1233927R
plus shipping and handling for one Rebuild Kit as shown.
Place Your Order Now at 440-377-5657
Hydraulic Auger Drive Motor All HFA400S & HFA400CNC
SHARC # A-OMM32A-C
plus shipping and handling for one Hydraulic Motor as shown.
Exact Replacement.

Replaces Part Numbers: OMM32A-C, 10331059, 0MM-32-151G0003, 10569003 & 11154303
Blade Brush for All HFA400S & HFA400CNC
All three Brushes below will replace Part Numbers: 10556627 or 1200396a
SHARC No Fuss Install:
No Additional Spacers, Bushings or Labor.
From the box to the saw with each brush.
Place Your Order Now at 440-377-5657
Back to SHARC Guides for Amada Saws Main Page
Place Your Order Now at 440-377-5657
SHARC Part # NC400SA
SHARC # A-3.00WW-LD
Light Duty Wire Brush
SHARC # A-3.00WW-HD
Heavy Duty Wire Brush
SHARC # A-3.00WW-SD
Standard Duty Wire Brush
Contact
Information