SHARC: # NCCTB400A
complete set of 4 guides.
Replaces Part #'s
Lower Fixed Insert = 1350733
Lower Moveable Insert = 1350707a
Upper Fixed Insert = 1350732a
Upper Moveable Insert = 1350705a
Sharc Part # NCCTB400A
SHARC Saw Parts for Amada Band Saws
to Fit Amada® CTB400 Model Bandsaws using a 1.500" Blade
In the U.S.A.
All Blade Guides
SHARC: # NCCTB400ABU
$595.00 Reman Service
plus shipping and handling for a complete set of 2 guides.
Support your tooling investment with SHARC backup guides for your CTB400. Designed to cost less and last longer than OEM they offer a 1200% more contact area. Yes, 1200%. They have carefully radiused edges, a reduced weight over OEM and no moving parts.
OEM assembly shown for example
Note: Destroyed bearing on the left.
Once any bearing play is present, the rollers cock to the side and the blade rides next to the roller cutting into the housing.
Note: Siezed bearing on the right.
Once the bearings seize and the roller stops, the blade is supported by approximately .062" of carbide which is not moving. The roller quicky grooves and places unwanted stress on the blade backing.
What's behind your High Dollar Carbide Blade?
Place Your Order Now at 440-377-5657