SHARC Saw Parts for Amada Band Saws HFA500S HFA500CNC
SHARC Components to Fit Amada® 500 S/CNC Model Bandsaws using a 2.00" Blade
Part # NC500SA
complete set of 4 guides.

Moveable guides are shipped with pins installed and set to proper height.
SHARC Part # NC500SA
Proudly Made
In the U.S.A.
SHARC: # NC500SABU
two complete back up sets as shown.
Signigicant characteristics:
These assemblies are a direct replacement for the expensive and brittle factory assembly. They will fit into the existing guide holder and will last longer with less trouble than the O.E.M. units.
Back to SHARC Guides for Amada Saws Main Page
Installation is quicker and easier than with the factory units.
Once installed, the guide will float and then follow the blade.
The polyurethane strip at the top of the guide aids in vibration control.
Guides shown below installed into customer's existing guide holder.
All Blade Guides
Part # A-CCK001
Chip Conveyor kit as shown. Shaft A, bushings, chain with master link, stainless steel bolt, seal and spring pins.
Shaft A 1280685b
Chain RS40SL - 42 Link
Flanged Bushing MB1620-24FDU
Bushing MB1625
Seal SCB-16
Bolt M8 X 50 304SUS
Spring Pin 6 X 28
Chip Conveyor Kit # A-CCK001 Replaces these O.E.M Part #'s.
Description Part / Drawing #
Kit # CCK001 Fits All HFA500S & CNC Machines.
SHARC Part # CCK001
Guide Kit # NC500SA Replaces these
O.E.M. Part #'s
1) 1233188
2) 1233189
Home
Fresh
Catches
Online
Catalog
Service
Remanufacturing
Information
Company
Place Your Order Now at 440-377-5657
Place Your Order Now at 440-377-5657
Fits all Older HFA500S & HFA500CNC saws utilizing the 10375302 / 1233920B Bearing Collar. Three Roller Assemblies per machine.
Replaces Part Numbers: Bearing Collar: 10375302 / 1233920B,
Ball Bearing: 10375307 / NAG4901UU, Seal: 10375308 / DS15223,
Snap Ring: 44611107 / RTW-24, Bearing Cap: 10375305 / 1233923B
Bearing Shaft: 10375303 / 1233921C, Screw: 10376215 / M6 X 16
Guide Roller for Older HFA500S & HFA500CNC
# A-1233920
Guide Roller Assembly as shown.
Comparison to OEM
SHARC's Replacement Roller Assembly, like all our products, has been field tested and approved. All critical dimensions are equal to those of the expensive factory unit.
Rebuild Kit for A-1233920B
SHARC # A-1233920B-RK
This is the complete rebuild kit for SHARC's guide roller assembly for Older HFA500S / HFA500CNC. This kit represents a savings of over 92% compared to the OEM rebuild.
Need Assistance? Call us at 216-272-0668
Sharc Part # NC500SABU
Large Anti-Vibration Roller for All HFA500S & HFA500CNC
SHARC # A-500S-1233929
Guide Roller Assembly as shown.
Replaces Part Numbers:1233929, 1301 or 10560128, BR-37 or 10348108, AE0838EO or 52314015 & P-9 or 1056007
SHARC's Replacement Roller Assembly, like all our products, has been field tested and approved. All critical dimensions are equal to those of the expensive factory unit.
What you get, Part Number A-500S-1233929
The SHARC Difference
Having been in the field rebuilding these units myself, I remember the frustrations of having no way to drive out the outer bearing race after failure. So you get SHARC's "in the field" trick from the start. A through hole in line with the outer race equipped with a set screw to keep out the dirt. SImply remove the screw to drive out the bearing.
SHARC # A-500S-1233929
Precision Machined and Hard Chrome Plated
Back to SHARC Guides for Amada Saws Main Page
Back to SHARC Guides for Amada Saws Main Page
Rebuild Kit for A-500S-1233929
SHARC # A-500S-1233929R
Rebuild Kit as shown.
Place Your Order Now at 440-377-5657
Hydraulic Auger Drive Motor All HFA500S & HFA500CNC
SHARC # A-OMM32A-C
Hydraulic Motor as shown.
Exact Replacement.

Replaces Part Numbers: OMM32A-C, 10331059, 0MM-32-151G0003, 10569003 & 11154303
Blade Brush for All HFA500S & HFA500CNC
SHARC # A-WH1503-WW
Blade Brush as shown.

Replaces Part Numbers: WH-1503, 10375144 & 10373769
SHARC No Fuss Install:
No Additional Spacers, Bushings or Labor.
Place Your Order Now at 440-377-5657
Back to SHARC Guides for Amada Saws Main Page
Place Your Order Now at 216-272-0668
Part: FL10W
one bulb as shown.
Replaces Part #'s
Fits into 400, 500S, 500CNC and other series saws equipped with Fluorescent Unit Style M-1110U1 10W
SHARC Fluorescent Light Bulb to Fit Amada Saws
Place Your Order Now at 440-377-5657
Part #: FL10W-Starter
Significant characteristics:
one starter as shown.
Fits into 400, 500S, 500CNC and other series saws equipped with Fluorescent Unit Style M-1110U1 10W
SHARC Flourescent Light Starter to Fit Amada Saws
SHARC Part # FL10W
SHARC Part # FL10W-Starter
Contact
Information