SHARC Saw Parts & Blade Guides to Fit
Amada® HFA330 Model Bandsaws using a 1.250" Blade
SHARC #NC330A
set of 4 guides.

Guides shipped with Pins Installed.
SHARC Part # NC330A
Proudly Made
In the U.S.A.
Back to SHARC Parts for Amada Saws Main Page
All Blade Guides
Guide Kit # 0103003 Replaces these
O.E.M. Part #'s
1) 1230250
2) 1230251
3) 1230252
4) 1230253
Home
Fresh
Catches
Online
Catalog
Service
Remanufacturing
Information
Company
Place Your Order Now at 440-377-5657
2 Back up strips and 2 Rubber Pads as shown. Kit fits HFA330 Saws using 1.25" Blade and Carbide Strip Backups.
SHARC: # A-330-BUS
SAHRC Part #A-300-BUS
SHARC: # A-330-BUR
Rollers as shown. Kit fits HFA330 Using Backup Rollers.

Replaces OEM # 10328320 (10530125)
6200DDU
Place Your Order Now at 440-377-5657
Large Anti-Vibration Roller for Amada 330 Series
SHARC # A-1239028C
Guide Roller Assembly as shown.
Replaces Part Numbers:1239028C, 1301 or 10560128, BR-37 or 10348108, AE0838EO or 52314015 & P-9 or 1056007
SHARC's Replacement Roller Assembly, like all our products, has been field tested and approved. All critical dimensions are equal to those of the expensive factory unit.
What you get, Part Number A-1239028C
The SHARC Difference
Having been in the field rebuilding these units myself, I remember the frustrations of having no way to drive out the outer bearing race after failure. So you get SHARC's "in the field" trick from the start. A through hole in line with the outer race equipped with a set screw to keep out the dirt. SImply remove the screw to drive out the bearing.
SHARC # A-1239028C
Precision Machined and Hard Chrome Plated
Rebuild Kit for A-1239028C
SHARC # A-1239028C-R
Rebuild Kit as shown.
Place Your Order Now at 440-377-5657
Chip Conveyor Parts for Amada 330 Series Bandsaws
SHARC # A-CCK-001
plus shipping and handling for one Rebuild Kit as shown. All parts needed for the Auger Drive rebuild.
Significant Characteristics:
Replaces Part Numbers: 1280685B, RSL40SL-42, MB1620-24FDU, SCB-16, M8X50-304SUS, 6X28 Spring Pin. This kit rebuilds all 400 series saws using the in tank drive set up.
Chip Conveyor Rebuild Kit for Amada Saws
Special Solid Center Auger for Amada 330 Series Equipped with Spiral Shaft 1280684b
Significant Characteristics:
Replaces Numbers: 1280684b or 10331011
This Auger was designed especially for saws producing normal to smaller chips. Where the light, hollow OEM unit fails, this unit pulls through. The specially designed mounting hub fits directly to your existing stub shaft. The Auger is the correct OD and length for a perfect fit. Not recommended for stainless steel or other stringy chips.
Part Number: A-1280684b-SCA $395.00 plus shipping and handling for one Auger Shaft as shown.
SHARC # A-OMM32A-C
Significant Characteristics:
Motor as shown. Motor is Exact Replacement
Replaces Part Numbers: OMM32A-C, 10331059, OMM-32-151G0003, 10569003 & 11154303
Coolant Valve Setting Plate for Amada Saws
Part Number: A-7922047-CSPCoolant Valve Setting Plate as shown. Made of STEEL for years of service. Coated in oil resistant epoxy.
Significant characteristics:
Replaces Part #'s 1230550a, 10381290, 7922047 & 10336045
SHARC Part # A-7922047-CSP
Steel
Place Your Order Now at 440-377-5657
Quick Approach Feeler for Amada 330 Series / 1.250" Blade
Part Number: A-1280215b-QAF - Quick Approach Feeler as shown. Coated in oil resistant epoxy.
Signigicant characteristics:
Replaces Part #'s 1280215b, 10328156
SHARC Part # A-1280215b-QAF
Place Your Order Now at 440-377-5657
Power Source / Switching Regulator for Amada® Saws
Part Number:A-RT2522 Power Source as shown.
Significant Characterstics
Fits directly into factory Chrome Cage.
Replaces Part Numbers: 10365047, 10337346, 10578807 or RT2-522(A)
This Electric Item is Not Returnable and should be installed by a qualified technician.
SHARC # A-RT2522
Rectifier / Bridge Rectifier for Amada® Saws
SHARC Number:A-VC1 Power Source as shown.
Significant Characterstics
Rectifier / Style VC1 KBPC2506 - Electrical Item - Non Returnable
Replaces Part Numbers: 10389729, 10579320 KBPC2506 VC1
This Electric Item is Not Returnable and should be installed by a qualified technician.
SHARC # A-VC1
Three Way Coolant Valve for Amada Saws
Part Number: A-604593 Three Way Coolant Valve as shown.
Significant characteristics:
Replaces Part #'s 604593
SHARC Part # A-604593
Contact
Information