Tappet Cylinder Kit
For all Rack & Pawl 250 saws with Tappet Assembly.
Part # 250TSK
$17.50 plus shipping and handling forTappet Switch Rebuild Kit as shown. Includes Spring and two O-Rings
Replaces Part #'s: 800193/10315506 Spring, O-Ring P-11/10315809 & O-Ring P-22/10315815
Part # 250VRK
$25.00 plus shipping and handling for vise cylinder rebuild kit as shown. 2 cylinder o-rings, 2 piston o-rings and 2 bushings.
Part # 250WBK
$201.00 plus shipping and handling for way bar kit as shown. Kit includes 4 wiper seals and 4 bushings.
Vise Cylinder Kit
Way Bar Kit
Proudly Made
In the U.S.A.
All Blade Guides
SHARC Saw Parts
for Amada Bandsaws
SHARC Seal Kits and Belts for
Amada® 250 & 250W Saws
For older 250's using rack and pawl vises.
Part # 250FCK2
$26.00 plus shipping and handling for feed cylinder rebuild kit as shown. 2 cylinder o-rings, 1 piston o-ring, one rod end o-ring, one rod scraper and 1 u-packing.
Feed Cylinder Kit 2
For newer 250's equipped with cylinders using scraper at cylinder cap.
Part # 250LCK1
$150.00 plus shipping and handling for lift cylinder rebuild kit as shown. 1 cylinder o-ring, 1 piston o-ring 1 rod scraper, 1 rod bushing, 2 self aligning bearings and 4 rubber bearing seals.
Lift Cylinder Kit 1
For older 250's equipped with lift cylinders using o-ring as piston seal.
For all Amada 250 saws.
Part # 250-FCBN
$67.50 plus shipping and handling for one
Feed Cylinder Bushing Nut as shown.
Replaces part #'s: 11066809, 10362902
Feed Cylinder Bushing Nut
For older 250's using Rack & Pawl Vises
Drive Belt for 250 series bandsaws 3HP 1.00" Blade
Drive Belt for 250W series bandsaws 5hp 1.25" Blade
Brush Drive Belt for All 250 series bandsaws
Coolant Pump Belt for all 250 series bandsaws
Part # 250BB $9.00 Each plus shipping. Replaces part # M37
Part # 250DB $60.00 Each plus shipping.
Replaces part number 1922V443
Part # 250WDB $95.00 Each plus shipping.
Replaces part number 2322V441
Part # 250CB $8.00 Each plus shipping.
Replaces part # M29 for all 250 saws using belt driven coolant pump.
Place Your Order Now at 216-272-0668
Place Your Order Now at 216-272-0668
Place Your Order Now at 216-272-0668
Part # 250-IWBK
$127.56 plus shipping and handling for one Idle Wheel Bearing Kit as shown. Includes 2 Bearings, 1 Crown Nut, 1 Crown Washer
and 1 Bearing Collar.
Bearings are Precision Timken with Matched Cup and Cone.
All Parts Available Seperately upon request.
Bearings 10357024 or 10312101
Crown Nut 10312112
Crown Washer 10330023 or 10205423
Bearing Collar 604204 or 10311626
Bearing Kit # 250-IWBK
Replaces these O.E.M Part #'s.
Description Part / Drawing #
Kit # 250-IWBK Fits All Amada 250 Series Saws
SHARC Part # 250-IWBK
Part # 250-DWBK
$87.10 plus shipping and handling for one Idle Wheel Bearing Kit as shown. Includes 2 Bearings, 1 Crown Nut and 1 Crown Washer
Bearings are Precision Timken with Matched Cup and Cone.
Bearings 10355914
Crown Nut 10311313
Crown Washer 10311316
Bearing Kit # 250-DWBK Replaces these O.E.M Part #'s.
Description Part / Drawing #
SHARC Part # 250-DWBK
Kit # 250-DWBK Fits All Amada 250 Series Saws
After prolonged use, the bearing collar developes indentations at the contact spot of the bearing races. This affects the spacing of your new bearings and creates the possibility
for early failure.
Place Your Order Now at 216-272-0668
